Author: D. M. Brewis
Publisher: iSmithers Rapra Publishing
ISBN: 1859573231
Category : Adhesion
Languages : en
Pages : 140
Book Description
Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Adhesion and Bonding to Polyolefins
Author: D. M. Brewis
Publisher: iSmithers Rapra Publishing
ISBN: 1859573231
Category : Adhesion
Languages : en
Pages : 140
Book Description
Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Publisher: iSmithers Rapra Publishing
ISBN: 1859573231
Category : Adhesion
Languages : en
Pages : 140
Book Description
Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Adhesion 9
Author: K.W. Allen
Publisher: Springer Science & Business Media
ISBN: 9780853343288
Category : Science
Languages : en
Pages : 218
Book Description
The use of adhesives continues to increase both in importance and in areas of use, particularly in engineering construction. Alongside this is a steady growth in our fundamental understanding of the factors involved. Both of these topics are reflected in various meetings and nowhere more consistently than at the Annual Conference on Adhesion and Adhesives at The City University each Easter. 1984 was the twenty-second of these when, once again, people carne from far and near to present accounts of their work and to discuss them in all their variety. This publication makes the papers available to the wider audience who were not able to attend in person. In presenting this volume, may I express sincere gratitude, both personally and on behalf of the University, to all those who contributed in so many and various ways to the conference. K. W. ALLEN Contents Preface. v l. Textile-to-Rubber Adhesion: Theory and Practice David B. Wootton (Milliken Industrials Ltd, Wellington Mill, Wellington Street, Bury, Lancashire BL8 2AY, UK) 2. Aspects of Adhesion Promotion with Flexible Coated Fabrics 13 J. R. Holker and A. J. G. Sagar (Shirley Institute, Didsbury, Manchester M20 8RX, UK) 3. The Adhesion of Some Ethylene-Vinyl Acetate Copolymers Applied as Hot Melt Coatings to Metals 33 T. A. Hatzinikolaou and D. E. Packham (School of Materials Science, University of Bath, Claverton Down, Bath BA2 7 A Y, UK) 4. Formation of Indium Bonds for Ultrasonic Systems and Examination of Metal Diffusion Bonds by Scanning Acoustic Microscopy .
Publisher: Springer Science & Business Media
ISBN: 9780853343288
Category : Science
Languages : en
Pages : 218
Book Description
The use of adhesives continues to increase both in importance and in areas of use, particularly in engineering construction. Alongside this is a steady growth in our fundamental understanding of the factors involved. Both of these topics are reflected in various meetings and nowhere more consistently than at the Annual Conference on Adhesion and Adhesives at The City University each Easter. 1984 was the twenty-second of these when, once again, people carne from far and near to present accounts of their work and to discuss them in all their variety. This publication makes the papers available to the wider audience who were not able to attend in person. In presenting this volume, may I express sincere gratitude, both personally and on behalf of the University, to all those who contributed in so many and various ways to the conference. K. W. ALLEN Contents Preface. v l. Textile-to-Rubber Adhesion: Theory and Practice David B. Wootton (Milliken Industrials Ltd, Wellington Mill, Wellington Street, Bury, Lancashire BL8 2AY, UK) 2. Aspects of Adhesion Promotion with Flexible Coated Fabrics 13 J. R. Holker and A. J. G. Sagar (Shirley Institute, Didsbury, Manchester M20 8RX, UK) 3. The Adhesion of Some Ethylene-Vinyl Acetate Copolymers Applied as Hot Melt Coatings to Metals 33 T. A. Hatzinikolaou and D. E. Packham (School of Materials Science, University of Bath, Claverton Down, Bath BA2 7 A Y, UK) 4. Formation of Indium Bonds for Ultrasonic Systems and Examination of Metal Diffusion Bonds by Scanning Acoustic Microscopy .
Surface Treatment of Materials for Adhesion Bonding
Author: Sina Ebnesajjad
Publisher: William Andrew
ISBN: 0815519192
Category : Science
Languages : en
Pages : 277
Book Description
This is a unique compilation of surface preparation principles and techniques for plastics, thermosets, elastomers, and metals bonding. With emphasis on the practical, it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals. It is both a reference and a guide for engineers, scientists, practitioners of surface treatment, researchers, students, and others involved in materials adhesion and processing.This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be a comprehensive overview, including more detailed explanation where necessary, in a continuous and logical progression. This book is intended to be a handbook for reference of surface treating processes. The more technical chapters can be bypassed to study the applied chapters. The text is accessible to readers with a college-level background in mathematics and chemistry, but an in-depth knowledge of adhesion technology is not required.
Publisher: William Andrew
ISBN: 0815519192
Category : Science
Languages : en
Pages : 277
Book Description
This is a unique compilation of surface preparation principles and techniques for plastics, thermosets, elastomers, and metals bonding. With emphasis on the practical, it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals. It is both a reference and a guide for engineers, scientists, practitioners of surface treatment, researchers, students, and others involved in materials adhesion and processing.This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be a comprehensive overview, including more detailed explanation where necessary, in a continuous and logical progression. This book is intended to be a handbook for reference of surface treating processes. The more technical chapters can be bypassed to study the applied chapters. The text is accessible to readers with a college-level background in mathematics and chemistry, but an in-depth knowledge of adhesion technology is not required.
Handbook of Polyolefins
Author: Cornelia Vasile
Publisher: CRC Press
ISBN: 9780203908716
Category : Technology & Engineering
Languages : en
Pages : 1040
Book Description
A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Publisher: CRC Press
ISBN: 9780203908716
Category : Technology & Engineering
Languages : en
Pages : 1040
Book Description
A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Engineering and Structural Adhesives
Author: D. J. Dunn
Publisher: iSmithers Rapra Publishing
ISBN: 9781859574362
Category : Science
Languages : en
Pages : 152
Book Description
This review discusses the types of engineering adhesives in use, properties, advantages and disadvantages, and applications. It is very clearly written, well referenced and provides an excellent overview of a rapidly developing field. The author is an expert with many years of experience in adhesive research and development. The review is accompanied by around 400 abstracts from papers and books in the Polymer Library, to facilitate further reading on this subject.
Publisher: iSmithers Rapra Publishing
ISBN: 9781859574362
Category : Science
Languages : en
Pages : 152
Book Description
This review discusses the types of engineering adhesives in use, properties, advantages and disadvantages, and applications. It is very clearly written, well referenced and provides an excellent overview of a rapidly developing field. The author is an expert with many years of experience in adhesive research and development. The review is accompanied by around 400 abstracts from papers and books in the Polymer Library, to facilitate further reading on this subject.
Adhesion International 1993
Author: Louis H. Sharpe
Publisher: CRC Press
ISBN: 1000725200
Category : Technology & Engineering
Languages : en
Pages : 822
Book Description
First published in 1996. ADHESION INTERNATIONAL 1993 is a volume of the Proceedings of the 16th Annual Meeting of The Adhesion Society, Inc. Williamsburg, Virginia, USA February 21-26,1993. This meeting featured an International Symposium on The Interphase. Interphases are extremely important in many areas of technology. They are formed when dissimilar materials are joined and they control the properties of adhesive joints, composites, coatings, and microelectronics devices. Considering the importance and scope of phenomena associated with the interphase, it was appropriate to convene such a symposium at the meeting.
Publisher: CRC Press
ISBN: 1000725200
Category : Technology & Engineering
Languages : en
Pages : 822
Book Description
First published in 1996. ADHESION INTERNATIONAL 1993 is a volume of the Proceedings of the 16th Annual Meeting of The Adhesion Society, Inc. Williamsburg, Virginia, USA February 21-26,1993. This meeting featured an International Symposium on The Interphase. Interphases are extremely important in many areas of technology. They are formed when dissimilar materials are joined and they control the properties of adhesive joints, composites, coatings, and microelectronics devices. Considering the importance and scope of phenomena associated with the interphase, it was appropriate to convene such a symposium at the meeting.
Adhesion Science and Engineering
Author:
Publisher: Elsevier
ISBN: 0080525989
Category : Science
Languages : en
Pages : 2020
Book Description
The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Publisher: Elsevier
ISBN: 0080525989
Category : Science
Languages : en
Pages : 2020
Book Description
The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Polymer Interface and Adhesion
Author: Wu
Publisher: CRC Press
ISBN: 9780824715335
Category : Technology & Engineering
Languages : en
Pages : 654
Book Description
Poly mer Interface and Adhesion provides the critical basis for further advancement in thisfield. Combining the principles of interfacial science, rheology, stress analysis, and fracturemechanics, the book teaches a new approach to the analysis of long standing problemssuch as: how is the interface formed; what are its physical and mechanical properties;and how does the interface modify the stress field and fracture strength of the material.The book offers many outstanding features, including extensive listings of pertinent references, exhaustive tabulations of the interfacial properties of polymers, critical reviews ofthe many conflicting theories, and complete discussions of coupling agents, adhesion promotion, and surface modifications. Emphasis is placed on physical concepts and mechanisms, using clear, understandable mathematics.Polymer Interface and Adhesion promotes a more thorough understanding of the physical, mechanical, and adhesive properties of multiphase, polymer systems. Polymer scientistsand engineers, surface chemists, materials scientists, rheologists, as well as chemical andmechanical engineers interested in the research, development or industrial applications ofpolymers, plastics, fibers, coatings, adhesives, and composites need this important newsource b
Publisher: CRC Press
ISBN: 9780824715335
Category : Technology & Engineering
Languages : en
Pages : 654
Book Description
Poly mer Interface and Adhesion provides the critical basis for further advancement in thisfield. Combining the principles of interfacial science, rheology, stress analysis, and fracturemechanics, the book teaches a new approach to the analysis of long standing problemssuch as: how is the interface formed; what are its physical and mechanical properties;and how does the interface modify the stress field and fracture strength of the material.The book offers many outstanding features, including extensive listings of pertinent references, exhaustive tabulations of the interfacial properties of polymers, critical reviews ofthe many conflicting theories, and complete discussions of coupling agents, adhesion promotion, and surface modifications. Emphasis is placed on physical concepts and mechanisms, using clear, understandable mathematics.Polymer Interface and Adhesion promotes a more thorough understanding of the physical, mechanical, and adhesive properties of multiphase, polymer systems. Polymer scientistsand engineers, surface chemists, materials scientists, rheologists, as well as chemical andmechanical engineers interested in the research, development or industrial applications ofpolymers, plastics, fibers, coatings, adhesives, and composites need this important newsource b
Adhesion Science
Author: John Comyn
Publisher: Royal Society of Chemistry
ISBN: 1847550061
Category : Technology & Engineering
Languages : en
Pages : 162
Book Description
The use of adhesives is widespread and growing, and there are few modern artefacts, from the simple cereal packet, to the jumbo jet, that are without this means of joining. Adhesion Science provides an illuminating account of the science underlying the use of adhesives, a branch of chemical technology which is fundamental to the science of coatings and composite materials and to the performance of all types of bonded structures. This book guides the reader through the essential basic polymer science, and the chemistry of adhesives in use at present. It discusses surface preparation for adhesive bonding, and the use of primers and coupling agents. There is a detailed chapter on contact angles and what can be predicted from them. A simple guide on stress distribution joints and how this relates to testing is included. It also examines the interaction of adhesives and the environment, including an analysis of the resistance of joints to water, oxygen and ultra-violet light. Adhesion Science provides a comprehensive introduction to the chemistry of adhesives, and will be of interest not only to chemists, but also to readers with a background in physical or materials science.
Publisher: Royal Society of Chemistry
ISBN: 1847550061
Category : Technology & Engineering
Languages : en
Pages : 162
Book Description
The use of adhesives is widespread and growing, and there are few modern artefacts, from the simple cereal packet, to the jumbo jet, that are without this means of joining. Adhesion Science provides an illuminating account of the science underlying the use of adhesives, a branch of chemical technology which is fundamental to the science of coatings and composite materials and to the performance of all types of bonded structures. This book guides the reader through the essential basic polymer science, and the chemistry of adhesives in use at present. It discusses surface preparation for adhesive bonding, and the use of primers and coupling agents. There is a detailed chapter on contact angles and what can be predicted from them. A simple guide on stress distribution joints and how this relates to testing is included. It also examines the interaction of adhesives and the environment, including an analysis of the resistance of joints to water, oxygen and ultra-violet light. Adhesion Science provides a comprehensive introduction to the chemistry of adhesives, and will be of interest not only to chemists, but also to readers with a background in physical or materials science.
Polyolefin Compounds and Materials
Author: Mariam Al-Ali AlMa'adeed
Publisher: Springer
ISBN: 3319259822
Category : Technology & Engineering
Languages : en
Pages : 354
Book Description
This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.
Publisher: Springer
ISBN: 3319259822
Category : Technology & Engineering
Languages : en
Pages : 354
Book Description
This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.