Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 24
Book Description
A Wind Tunnel Study of Icing Effects on a Business Jet Airfoil
A Wind Tunnel Study of Icing Effects on a Business Jet Airfoil
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721570294
Category :
Languages : en
Pages : 36
Book Description
Aerodynamic wind tunnel tests were conducted to study the effects of various ice accretions on the aerodynamic performance of a 36-inch chord, two-dimensional business jet airfoil. Eight different ice shape configurations were tested. Four were castings made from molds of ice shapes accreted in an icing wind tunnel. Two were made using computationally smoothed tracings of two of the ice shapes accreted in the icing tunnel. These smoothed profiles were then extended in the spanwise direction to form a two-dimensional ice shape. The final two configurations were formed by applying grit to the smoothed ice shapes. The ice shapes resulted in as much as 48% reduction in maximum lift coefficient from that of the clean airfoil. Large increases in drag and changes in pitching moment were also observed. The castings and their corresponding smoothed counterparts yielded similar results. Little change in performance was observed with the addition of grit to the smoothed ice shapes. Changes in the Reynolds number (from 3 x 10(exp 6) to 10.5 x 10(exp 6) and Mach number (from 0.12 to 0.28) did not significantly affect the iced-airfoil performance coefficients. Addy, Harold E., Jr. and Broeren, Andy P. and Zoeckler, Joesph G. and Lee, Sam Glenn Research Center NASA/TM-2003-212124, NAS 1.15:212124, E-13776, AIAA Paper 2003-0727
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721570294
Category :
Languages : en
Pages : 36
Book Description
Aerodynamic wind tunnel tests were conducted to study the effects of various ice accretions on the aerodynamic performance of a 36-inch chord, two-dimensional business jet airfoil. Eight different ice shape configurations were tested. Four were castings made from molds of ice shapes accreted in an icing wind tunnel. Two were made using computationally smoothed tracings of two of the ice shapes accreted in the icing tunnel. These smoothed profiles were then extended in the spanwise direction to form a two-dimensional ice shape. The final two configurations were formed by applying grit to the smoothed ice shapes. The ice shapes resulted in as much as 48% reduction in maximum lift coefficient from that of the clean airfoil. Large increases in drag and changes in pitching moment were also observed. The castings and their corresponding smoothed counterparts yielded similar results. Little change in performance was observed with the addition of grit to the smoothed ice shapes. Changes in the Reynolds number (from 3 x 10(exp 6) to 10.5 x 10(exp 6) and Mach number (from 0.12 to 0.28) did not significantly affect the iced-airfoil performance coefficients. Addy, Harold E., Jr. and Broeren, Andy P. and Zoeckler, Joesph G. and Lee, Sam Glenn Research Center NASA/TM-2003-212124, NAS 1.15:212124, E-13776, AIAA Paper 2003-0727
Ice Accretions and Icing Effects for Modern Airfoils
Author: Harold E. Addy
Publisher:
ISBN:
Category : Aerofoils
Languages : en
Pages : 292
Book Description
Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented.
Publisher:
ISBN:
Category : Aerofoils
Languages : en
Pages : 292
Book Description
Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented.
Wind Turbines in Cold Climates
Author: Lorenzo Battisti
Publisher: Springer
ISBN: 3319051911
Category : Technology & Engineering
Languages : en
Pages : 355
Book Description
This book addresses the key concerns regarding the operation of wind turbines in cold climates and focuses in particular on the analysis of icing and methods for its mitigation. Topics covered include the implications of cold climates for wind turbine design and operation, the relevance of icing for wind turbines, the icing process itself, ice prevention systems and thermal anti-icing system design. In each chapter, care is taken to build systematically on the basic knowledge, providing the reader with the level of detail required for a thorough understanding. An important feature is the inclusion of several original analytical and numerical models for ready computation of icing impacts and design assessment. The breadth of the coverage and the in-depth scientific analysis, with calculations and worked examples relating to both fluid dynamics and thermodynamics, ensure that the book will serve not only as a textbook but also as a practical manual for general design tasks.
Publisher: Springer
ISBN: 3319051911
Category : Technology & Engineering
Languages : en
Pages : 355
Book Description
This book addresses the key concerns regarding the operation of wind turbines in cold climates and focuses in particular on the analysis of icing and methods for its mitigation. Topics covered include the implications of cold climates for wind turbine design and operation, the relevance of icing for wind turbines, the icing process itself, ice prevention systems and thermal anti-icing system design. In each chapter, care is taken to build systematically on the basic knowledge, providing the reader with the level of detail required for a thorough understanding. An important feature is the inclusion of several original analytical and numerical models for ready computation of icing impacts and design assessment. The breadth of the coverage and the in-depth scientific analysis, with calculations and worked examples relating to both fluid dynamics and thermodynamics, ensure that the book will serve not only as a textbook but also as a practical manual for general design tasks.
Man-Machine-Environment System Engineering
Author: Shengzhao Long
Publisher: Springer Nature
ISBN: 9819771390
Category :
Languages : en
Pages : 993
Book Description
Publisher: Springer Nature
ISBN: 9819771390
Category :
Languages : en
Pages : 993
Book Description
41st AIAA Aerospace Sciences Meeting & Exhibit
43rd AIAA Aerospace Sciences Meeting & Exhibit
Scientific and Technical Aerospace Reports
2023 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2023) Proceedings
Author: Song Fu
Publisher: Springer Nature
ISBN: 9819739985
Category :
Languages : en
Pages : 1975
Book Description
Publisher: Springer Nature
ISBN: 9819739985
Category :
Languages : en
Pages : 1975
Book Description