Author: Gordon P. Warn
Publisher:
ISBN:
Category : Earthquake resistant design
Languages : en
Pages : 280
Book Description
A Study of the Coupled Horizontal-vertical Behavior of Elastomeric and Lead-rubber Seismic Isolation Bearings
Author: Gordon P. Warn
Publisher:
ISBN:
Category : Earthquake resistant design
Languages : en
Pages : 280
Book Description
Publisher:
ISBN:
Category : Earthquake resistant design
Languages : en
Pages : 280
Book Description
A Study of the Coupled Horizontal-vertical Behaviour of Elastomeric and Lead-rubber Seismic Isolation Bearings
The Coupled Horizontal-vertical Response of Elastomeric and Lead-rubber Seismic Isolation Bearings
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 312
Book Description
Elastomeric and lead-rubber bearings are two types of seismic isolation hardware widely implemented in buildings, bridges and other infrastructure in the United States and around the world. These bearings consist of a number of elastomeric (rubber) layers bonded to intermediate steel (shim) plates. The total thickness of rubber controls the low horizontal stiffness and the close spacing of the intermediate shims provides a large vertical stiffness for a given bonded rubber area and elastomer shear modulus. Conceptually, a lead-rubber bearing differs from an elastomeric bearing only through the addition of a lead-core typically located in a central hole. During earthquake ground shaking, the low horizontal stiffness of elastomeric and lead-rubber bearings translates into large lateral displacements, typically on the order of 100--200% rubber shear strain, that might lead to significant reductions in the axial load carrying capacity and vertical stiffness of the individual bearings. This dissertation presents an analytical and experimental investigation of the coupled horizontal-vertical response of elastomeric and lead-rubber bearings focusing on the influence of lateral displacement on the vertical stiffness. Component testing was performed with reduced scale low-damping rubber (LDR) and lead-rubber (LR) bearings to determine the vertical stiffness at various lateral offsets. The numerical studies included finite element (FE) analysis of the reduced scale LDR bearing. The results of the experimental and FE investigations were used to evaluate three analytical formulations to predict the vertical stiffness at a given lateral displacement. From component testing the vertical stiffness of the LDR and LR bearings was shown to decrease with increasing lateral displacement and at a lateral displacement equivalent to 150% rubber shear strain a 40--50% reduction in vertical stiffness was observed. One of the three analytical formulations, based on the Koh-Kelly two-spring model, was shown to predicted the measured reduction in vertical stiffness of the LDR and LR bearings at each lateral offset with reasonable accuracy. In addition, earthquake simulation testing was performed to investigate the coupled horizontal-vertical response of a bridge model isolated with either LDR or LR bearings. The results of simulations performed with three components of excitation were used to evaluate an equivalent linear static (ELS) procedure for the estimation of the vertical load due to the vertical ground shaking. The equivalent linear static procedure was shown to conservatively estimate measured maximum vertical loads due to the vertical component of excitation for most simulations.
Publisher:
ISBN:
Category :
Languages : en
Pages : 312
Book Description
Elastomeric and lead-rubber bearings are two types of seismic isolation hardware widely implemented in buildings, bridges and other infrastructure in the United States and around the world. These bearings consist of a number of elastomeric (rubber) layers bonded to intermediate steel (shim) plates. The total thickness of rubber controls the low horizontal stiffness and the close spacing of the intermediate shims provides a large vertical stiffness for a given bonded rubber area and elastomer shear modulus. Conceptually, a lead-rubber bearing differs from an elastomeric bearing only through the addition of a lead-core typically located in a central hole. During earthquake ground shaking, the low horizontal stiffness of elastomeric and lead-rubber bearings translates into large lateral displacements, typically on the order of 100--200% rubber shear strain, that might lead to significant reductions in the axial load carrying capacity and vertical stiffness of the individual bearings. This dissertation presents an analytical and experimental investigation of the coupled horizontal-vertical response of elastomeric and lead-rubber bearings focusing on the influence of lateral displacement on the vertical stiffness. Component testing was performed with reduced scale low-damping rubber (LDR) and lead-rubber (LR) bearings to determine the vertical stiffness at various lateral offsets. The numerical studies included finite element (FE) analysis of the reduced scale LDR bearing. The results of the experimental and FE investigations were used to evaluate three analytical formulations to predict the vertical stiffness at a given lateral displacement. From component testing the vertical stiffness of the LDR and LR bearings was shown to decrease with increasing lateral displacement and at a lateral displacement equivalent to 150% rubber shear strain a 40--50% reduction in vertical stiffness was observed. One of the three analytical formulations, based on the Koh-Kelly two-spring model, was shown to predicted the measured reduction in vertical stiffness of the LDR and LR bearings at each lateral offset with reasonable accuracy. In addition, earthquake simulation testing was performed to investigate the coupled horizontal-vertical response of a bridge model isolated with either LDR or LR bearings. The results of simulations performed with three components of excitation were used to evaluate an equivalent linear static (ELS) procedure for the estimation of the vertical load due to the vertical ground shaking. The equivalent linear static procedure was shown to conservatively estimate measured maximum vertical loads due to the vertical component of excitation for most simulations.
Mechanics of Rubber Bearings for Seismic and Vibration Isolation
Author: James M. Kelly
Publisher: John Wiley & Sons
ISBN: 1119972809
Category : Technology & Engineering
Languages : en
Pages : 217
Book Description
Widely used in civil, mechanical and automotive engineering since the early 1980s, multilayer rubber bearings have been used as seismic isolation devices for buildings in highly seismic areas in many countries. Their appeal in these applications comes from their ability to provide a component with high stiffness in one direction with high flexibility in one or more orthogonal directions. This combination of vertical stiffness with horizontal flexibility, achieved by reinforcing the rubber by thin steel shims perpendicular to the vertical load, enables them to be used as seismic and vibration isolators for machinery, buildings and bridges. Mechanics of Rubber Bearings for Seismic and Vibration Isolation collates the most important information on the mechanics of multilayer rubber bearings. It explores a unique and comprehensive combination of relevant topics, covering all prerequisite fundamental theory and providing a number of closed-form solutions to various boundary value problems as well as a comprehensive historical overview on the use of isolation. Many of the results presented in the book are new and are essential for a proper understanding of the behavior of these bearings and for the design and analysis of vibration or seismic isolation systems. The advantages afforded by adopting these natural rubber systems is clearly explained to designers and users of this technology, bringing into focus the design and specification of bearings for buildings, bridges and industrial structures. This comprehensive book: includes state of the art, as yet unpublished research along with all required fundamental concepts; is authored by world-leading experts with over 40 years of combined experience on seismic isolation and the behavior of multilayer rubber bearings; is accompanied by a website at www.wiley.com/go/kelly The concise approach of Mechanics of Rubber Bearings for Seismic and Vibration Isolation forms an invaluable resource for graduate students and researchers/practitioners in structural and mechanical engineering departments, in particular those working in seismic and vibration isolation.
Publisher: John Wiley & Sons
ISBN: 1119972809
Category : Technology & Engineering
Languages : en
Pages : 217
Book Description
Widely used in civil, mechanical and automotive engineering since the early 1980s, multilayer rubber bearings have been used as seismic isolation devices for buildings in highly seismic areas in many countries. Their appeal in these applications comes from their ability to provide a component with high stiffness in one direction with high flexibility in one or more orthogonal directions. This combination of vertical stiffness with horizontal flexibility, achieved by reinforcing the rubber by thin steel shims perpendicular to the vertical load, enables them to be used as seismic and vibration isolators for machinery, buildings and bridges. Mechanics of Rubber Bearings for Seismic and Vibration Isolation collates the most important information on the mechanics of multilayer rubber bearings. It explores a unique and comprehensive combination of relevant topics, covering all prerequisite fundamental theory and providing a number of closed-form solutions to various boundary value problems as well as a comprehensive historical overview on the use of isolation. Many of the results presented in the book are new and are essential for a proper understanding of the behavior of these bearings and for the design and analysis of vibration or seismic isolation systems. The advantages afforded by adopting these natural rubber systems is clearly explained to designers and users of this technology, bringing into focus the design and specification of bearings for buildings, bridges and industrial structures. This comprehensive book: includes state of the art, as yet unpublished research along with all required fundamental concepts; is authored by world-leading experts with over 40 years of combined experience on seismic isolation and the behavior of multilayer rubber bearings; is accompanied by a website at www.wiley.com/go/kelly The concise approach of Mechanics of Rubber Bearings for Seismic and Vibration Isolation forms an invaluable resource for graduate students and researchers/practitioners in structural and mechanical engineering departments, in particular those working in seismic and vibration isolation.
Noise and Vibration Mitigation for Rail Transportation Systems
Author: Xiaozhen Sheng
Publisher: Springer Nature
ISBN: 9819978521
Category :
Languages : en
Pages : 782
Book Description
Publisher: Springer Nature
ISBN: 9819978521
Category :
Languages : en
Pages : 782
Book Description
A Catalogue of the Genuine and Entire Collection of Limnings, Miniatures, Fine Antique Camŏs, Intaglias, Coins, Medals, and Other Curiosities of Mr. Robert Dingley, Sen. Late of Bishopgate-street, Goldsmith and Jeweller, Deceased
Technical Report
Author:
Publisher:
ISBN:
Category : Earthquake engineering
Languages : en
Pages : 232
Book Description
Publisher:
ISBN:
Category : Earthquake engineering
Languages : en
Pages : 232
Book Description
Proceedings of the Fourth PRC-US Workshop on Seismic Analysis and Design of Special Bridges
Mechanics of Low Shape Factor Elastomeric Seismic Isolation Bearings
Author: Ian D. Aiken
Publisher:
ISBN:
Category : Bearings (Machinery)
Languages : en
Pages : 204
Book Description
Publisher:
ISBN:
Category : Bearings (Machinery)
Languages : en
Pages : 204
Book Description
Analytical and Experimental Investigation of a Controlled Rocking Approach for Seismic Protection of Bridge Steel Truss Piers
Author: Michael Pollino
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 492
Book Description
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 492
Book Description