Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Biomass Densification PDF full book. Access full book title Biomass Densification by Jaya Shankar Tumuluru. Download full books in PDF and EPUB format.
Author: Jaya Shankar Tumuluru Publisher: Springer Nature ISBN: 3030628884 Category : Technology & Engineering Languages : en Pages : 204
Book Description
This monograph discusses the various biomass feedstocks currently available for biofuels production, and mechanical preprocessing technologies to reduce the feedstock variability for biofuels applications. Variability in the properties of biomass—in terms of moisture, particle size distribution, and low-density—results in storage, transportation, handling, and feeding issues. Currently, biorefineries face serious particle bridging issues, uneven discharge, jamming of equipment, and transportation problems. These issues must be solved in order for smooth operations to be possible. Mechanical preprocessing technologies, such as size reduction, densification, and moisture management using drying and dewatering, can help to overcome these issues. Many densification systems exist that will assist in converting low-density biomass to a high-density commodity type feedstock. In 6 chapters, the impact of densification process variables, such as temperature, pressure, moisture, etc., on biomass particle agglomeration, the quality of the densified products, and the overall energy consumption of the process are discussed, as are the various compression models for powders that can be used for biomass particles agglomeration behavior and optimization of the densification process using statistical and evolutionary methods. The suitability of these densified products for biochemical and thermochemical conversion pathways is also discussed, as well as the various international standards (CEN and ISO) they must adhere to. The author has worked on biomass preprocessing at Idaho National Laboratory for the last ten years. He is the principal investigator for the U.S. Department of Energy Bioenergy Technologies Office-funded “Biomass Size Reduction and Densification” project. He has developed preprocessing technologies to reduce cost and improve quality. The author has published many papers and books focused on biomass preprocessing and pretreatments. Biomass process engineers and biorefinery managers can benefit from this book. Students in chemical, mechanical, biological, and environmental engineering can also use the book to understand preprocessing technologies, which greatly assist in improving the biomass critical material attributes. The book can help policymakers and energy systems planners to understand the biomass properties limitations and technologies to overcome the same.
Author: Jaya Shankar Tumuluru Publisher: Springer Nature ISBN: 3030628884 Category : Technology & Engineering Languages : en Pages : 204
Book Description
This monograph discusses the various biomass feedstocks currently available for biofuels production, and mechanical preprocessing technologies to reduce the feedstock variability for biofuels applications. Variability in the properties of biomass—in terms of moisture, particle size distribution, and low-density—results in storage, transportation, handling, and feeding issues. Currently, biorefineries face serious particle bridging issues, uneven discharge, jamming of equipment, and transportation problems. These issues must be solved in order for smooth operations to be possible. Mechanical preprocessing technologies, such as size reduction, densification, and moisture management using drying and dewatering, can help to overcome these issues. Many densification systems exist that will assist in converting low-density biomass to a high-density commodity type feedstock. In 6 chapters, the impact of densification process variables, such as temperature, pressure, moisture, etc., on biomass particle agglomeration, the quality of the densified products, and the overall energy consumption of the process are discussed, as are the various compression models for powders that can be used for biomass particles agglomeration behavior and optimization of the densification process using statistical and evolutionary methods. The suitability of these densified products for biochemical and thermochemical conversion pathways is also discussed, as well as the various international standards (CEN and ISO) they must adhere to. The author has worked on biomass preprocessing at Idaho National Laboratory for the last ten years. He is the principal investigator for the U.S. Department of Energy Bioenergy Technologies Office-funded “Biomass Size Reduction and Densification” project. He has developed preprocessing technologies to reduce cost and improve quality. The author has published many papers and books focused on biomass preprocessing and pretreatments. Biomass process engineers and biorefinery managers can benefit from this book. Students in chemical, mechanical, biological, and environmental engineering can also use the book to understand preprocessing technologies, which greatly assist in improving the biomass critical material attributes. The book can help policymakers and energy systems planners to understand the biomass properties limitations and technologies to overcome the same.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
It is now a well-acclaimed fact that burning fossil fuels and deforestation are major contributors to climate change. Biomass from plants can serve as an alternative renewable and carbon-neutral raw material for the production of bioenergy. Low densities of 40-60 kg/m3 for lignocellulosic and 200-400 kg/m3 for woody biomass limits their application for energy purposes. Prior to use in energy applications these materials need to be densified. The densified biomass can have bulk densities over 10 times the raw material helping to significantly reduce technical limitations associated with storage, loading and transportation. Pelleting, briquetting, or extrusion processing are commonly used methods for densification. The aim of the present research is to develop a comprehensive review of biomass processing that includes densification, preprocessing, modeling and optimization. The specific objective include carrying out a technical review on (a) mechanisms of particle bonding during densification; (b) methods of densification including extrusion, briquetting, pelleting, and agglomeration; (c) effects of process and feedstock variables and biomass biochemical composition on the densification (d) effects of preprocessing such as grinding, preheating, steam explosion, and torrefaction on biomass quality and binding characteristics; (e) models for understanding the compression characteristics; and (f) procedures for response surface modeling and optimization.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The world is currently facing challenges to reduce the dependence on fossil fuels and to achieve a sustainable renewable supply. Renewable energies represent a diversity of energy sources that can help to maintain the equilibrium of different ecosystems. Among the various sources of renewable energy, biomass is finding more uses as it is considered carbon neutral since the carbondioxide released during its use is already part of the carbon cycle (Arias et al., 2008). Increasing the utilization of biomass for energy can help to reduce the negative CO2 impact on the environment and help to meet the targets established in the Kyoto Protocol (UN, 1998). Energy from biomass can be produced from different processes like thermochemical (combustion, gasification, and pyrolysis), biological (anaerobic digestion, fermentation) or chemical (esterification) where direct combustion can provide a direct near-term energy solution (Arias et al., 2008). Some of the inherent problems with raw biomass materials, like low bulk density, high moisture content, hydrophilic nature and low calorific value, limit the ease of use of biomass for energy purposes (Arias et al., 2008). In fact, due to its low energy density compared to fossil fuels, high volumes of biomass will be needed; adding to problems associated with storage, transportation and feed handling at a cogeneration plant. Furthermore, grinding biomass pulverizes, can be very costly and in some cases impractical. All of these drawbacks have given rise to the development of new technologies in order to increase the quality of biomass fuels. The purpose of the work is mainly in four areas 1) Overview of the torrefaction process and to do a literature review on i) Physical properties of torrefied raw material and torrefaction gas composition. 2) Basic principles in design of packed bed i) Equations governing the flow of material in packed bed ii) Equations governing the flow of the gases in packed bed iii) Effect of physical properties of the raw materials on the packed bed design 3) Design of packed bed torrefier of different capacities. 4) Development of an excel sheet for calculation of length and diameter of the packed bed column based on the design considerations.
Author: Jaya Shankar Tumuluru Publisher: World Scientific ISBN: 1800613806 Category : Technology & Engineering Languages : en Pages : 346
Book Description
First-generation ethanol plants did not have many operational challenges as the feedstocks (e.g., corn) used for fuel production are dense, stable, storable, and shippable commodity-type products with fewer conversion challenges. These feedstock properties led the first-generation large-scale biorefineries to grow exponentially. In the second-generation biofuels, the feedstocks used are agricultural and forest residues, dedicated energy crops, industrial wastes, and municipal solid waste. When the industry tested these feedstocks for biofuel production, they faced flowability, storage, transportation, and conversion issues. One way to overcome some of the feeding, handling, transportation, and variable moisture challenges is to densify the biomass. Pellet mills and briquette presses are commonly used to produce densified products. The densified products have uniform size, shape, higher bulk density, and better downstream conversion performance. Also, the densified products are aerobically stable and can be stored for longer durations without any loss in quality.This book's focus is on understanding how the densification process variables, biomass types and their blends, mechanical preprocessing, and thermal and chemical pretreatment methods impact the quality of the densified products produced for biofuel production. Finally, the book also explores the conversion performance of densified biomass for biofuel production.
Author: Jaap Koppejan Publisher: Earthscan ISBN: 1849773041 Category : Nature Languages : en Pages : 465
Book Description
This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.
Author: Leonel JR Nunes Publisher: Academic Press ISBN: 0128096977 Category : Technology & Engineering Languages : en Pages : 256
Book Description
Torrefaction of Biomass for Energy Applications: From Fundamentals to Industrial Scale explores the processes, technology, end-use, and economics involved in torrefaction at the industrial scale for heat and power generation. Its authors combine their industry experience with their academic expertise to provide a thorough overview of the topic. Starting at feedstock pretreatment, followed by torrefaction processes, the book includes plant design and operation, safety aspects, and case studies focusing on the needs and challenges of the industrial scale. Commercially available technologies are examined and compared, and their economical evaluation and life cycle assessment are covered as well. Attention is also given to non-woody feedstock, alternative applications, derived fuels, recent advances, and expected future developments. For its practical approach, this book is ideal for professionals in the biomass industry, including those in heat and power generation. It is also a useful reference for researchers and graduate students in the area of biomass and biofuels, and for decision makers, policy makers, and analysts in the energy field. - Compares efficiency and performance of different commercially available technologies from the practical aspects of daily operation in an industrial scale plant - Presents a cost analysis of the production, logistics, and storage of torrefied biomass - Includes case studies addressing challenges that may occur in the daily operation in an industrial scale plant - Covers other associated technologies, the densification of torrefied biomass, and non-woody feedstock
Author: Asamoah, Bernice Publisher: International Water Management Institute (IWMI). CGIAR Research Program on Water, Land and Ecosystems (WLE). ISBN: 9290908467 Category : Technology & Engineering Languages : en Pages : 55
Book Description
Where modern heating and cooking fuels for domestic, institutional, commercial and industrial use are not readily available, briquettes made from biomass residues could contribute to the sustainable supply of energy. This study reviews the briquette making process, looking at the entire value chain starting from the type and characteristics of feedstock used for briquette making to the potential market for briquettes in developing countries. It also analyzes the role that gender plays in briquette production. Depending on the raw materials used and technologies applied during production, fuel briquettes come in different qualities and dimensions, and thus require appropriate targeting of different market segments. Key drivers of success in briquette production and marketing include ensuring consistent supply of raw materials with good energy qualities, appropriate technologies, and consistency in the quality and supply of the briquettes. Creating strong partnerships with key stakeholders, such as the municipality, financiers and other actors within the briquette value chain, and enabling policy are important drivers for the success of briquette businesses.
Author: Mohammad Ali Abdoli Publisher: Springer ISBN: 3319744828 Category : Technology & Engineering Languages : en Pages : 184
Book Description
This book takes the reader on a journey from the moment that raw wood material enters the factory to the final pellet consumption. It starts by reviewing biomass application and its role for the future development of renewable energies, discussing different biomass conversion methods as alternatives to direct utilization. The second chapter then comprehensively examines densification processes, with a focus on the pelleting process. Chapter three further elaborates on the pelleting process, including an overview of the pellet structure and properties, and the history of this process. The subsequent chapters provide a detailed account of the production process from raw material delivery to final distribution, addressing the chemical and physical quality, and presenting measurement methods and standards. In the final chapters, the authors describe in detail the pellet combustion process and emissions.
Author: Jaya Shankar Tumuluru
Author: Jaya Shankar Tumuluru
Author: 
Author: 
Author: Sribas Chandra Bhattacharya
Author: Thomas B. Reed
Author: Jaya Shankar Tumuluru
Author: Jaap Koppejan
Author: Leonel JR Nunes
Author: Asamoah, Bernice
Author: Mohammad Ali Abdoli