A Cooperative Symbol Synchronization Scheme for Improved Efficiency in Multiple Access Wireless Communication Systems PDF Download

Author: Bret Foreman
Publisher:
ISBN:
Category :
Languages : en
Pages : 50

View

Book Description

Author: Essam Saleh Altubaishi
Publisher:
ISBN:
Category :
Languages : en
Pages : 123

View

Book Description
Cooperative communication has recently become a key technology for modern wireless networks such as 3GPP long-term evolution and WiMAX, because in such networks the transmission rate, the communication reliability, and coverage problems could be improved in a cost-effective manner. This, however, faces many design challenges. First, cooperative transmission typically involves a relaying phase which requires extra resources. This may cause a reduction in the spectral efficiency. Second, extra control signaling increases the complexity of operation, which may limit practical implementation. In addition, a wireless channel is time-varying, mainly due to the multipath propagation. As a result, a careful design of efficient cooperative communication systems is required, not only to enhance the spectral efficiency and maintain the quality-of-service (QoS), but also to be practical. In this dissertation, we aim to address the challenges imposed by cooperative communication and wireless transmission, and design the efficient and distributed systems which can be practically implemented in existing wireless systems. The research work is divided into two main topics: 1) adaptive cooperative wireless systems with variable-rate transmission, and 2) cooperative wireless systems with a power consumption constraint. The first topic investigates how the spectral efficiency of cooperative wireless communication systems can be improved while maintaining the QoS in terms of bit error rate and outage probability. The spectral efficiency enhancement is achieved by using three techniques: adaptivity over the relay node (i.e., relay node is active or not), adaptivity over the modulation mode, and relay selection. Based on that, we propose several adaptive cooperative schemes for both the decode-and-forward (DF) and amplify-and-forward (AF) protocols. To evaluate these schemes, we provide performance analysis in terms of average spectral efficiency, average bit error rate (ABER), and outage probability over Rayleigh fading channels. We start with the single-relay cooperative system using DF protocol, in which two adaptive cooperative schemes with variable-rate transmission are proposed. The first scheme, called the minimum error rate scheme (MERS), aims to exploit the transmit diversity to improve the bit error rate. By trading the multiplexing gain against the diversity gain, we propose the second scheme, called the maximum spectral efficiency scheme (MSES), in which cooperative transmission is avoided whenever it is not beneficial. The MERS improves the ABER significantly and achieves equal or better average spectral efficiency compared to the fixed (i.e., non-adaptive) relaying scheme. In contrast, the MSES provides the best average spectral efficiency due to its ability to not only adapt to the channel variation but also to switch between cooperative and non-cooperative transmissions. To further increase the spectral efficiency, we then propose the third scheme, called variable-rate based relay selection (VRRS) scheme, in which a relay node is selected from among the available relay nodes, based on a predefined criterion. Furthermore, we propose two AF adaptive cooperative schemes, mainly to enhance the spectral efficiency. In the first scheme, we introduce a generalized switching policy (GSP) for a single-relay cooperative wireless system that exploits the variable-rate transmission and useful cooperative regions. The second scheme, called the AF efficient relay selection (AFERS) scheme, extends the GSP to also consider the relay selection technique. Analytical and simulation results verify that the AFERS scheme not only outperforms conventional direct transmission in terms of the average spectral efficiency, but also the AF fixed relaying and the outage-based AF adaptive cooperative scheme. The second topic investigates the fair power consumption of the relay nodes for AF cooperative wireless communication systems. The fairness is defined as to achieve equal power consumption over the relay nodes. We focus on how the relay selection process can be controlled in a distributed manner so that the power consumption of the relay nodes can be included in relay selection. We first introduce a simple closed-form expression for the weight coefficient used in order to achieve the considered fairness that depends only on the local average channel conditions of the relay path. We then derive closed-form expressions of the weighted outage probability and ABER and show that our proposed strategy not only has less complexity than the conventional centralized one but also provides better accuracy in distributing the total consumed power equally among the relay nodes without affecting the performance.

Author: Uysal, Murat
Publisher: IGI Global
ISBN: 1605666661
Category : Computers
Languages : en
Pages : 632

View

Book Description
Offers practitioners, researchers, and academicians with fundamental principles of cooperative communication. This book provides readers diverse findings and exposes underlying issues in the analysis, design, and optimization of wireless systems.

Author: Ke-Lin Du
Publisher: Cambridge University Press
ISBN: 1139485768
Category : Technology & Engineering
Languages : en
Pages : 1020

View

Book Description
This practically-oriented, all-inclusive guide covers all the major enabling techniques for current and next-generation cellular communications and wireless networking systems. Technologies covered include CDMA, OFDM, UWB, turbo and LDPC coding, smart antennas, wireless ad hoc and sensor networks, MIMO, and cognitive radios, providing readers with everything they need to master wireless systems design in a single volume. Uniquely, a detailed introduction to the properties, design, and selection of RF subsystems and antennas is provided, giving readers a clear overview of the whole wireless system. It is also the first textbook to include a complete introduction to speech coders and video coders used in wireless systems. Richly illustrated with over 400 figures, and with a unique emphasis on practical and state-of-the-art techniques in system design, rather than on the mathematical foundations, this book is ideal for graduate students and researchers in wireless communications, as well as for wireless and telecom engineers.

Author: Ali Arshad Nasir
Publisher:
ISBN:
Category : Computer algorithms
Languages : en
Pages : 306

View

Book Description
Cooperative communication is an attractive solution to combat fading in wireless communication systems. Achieving synchronization is a fundamental requirement in such systems. In cooperative networks, multiple single antenna relay terminals receive and cooperatively transmit the source information to the destination. The multiple distributed nodes, each with its own local oscillator, give rise to multiple timing offsets (MTOs) and multiple carrier frequency offsets (MCFOs). Particularly, the received signal at the destination is the superposition of the relays' transmitted signals that are attenuated differently, are no longer aligned with each other in time, and experience phase rotations at different rates due to different channels, MTOs, and MCFOs, respectively. The loss of synchronization due to the presence of MTOs and MCFOs sets up the recovery of the source signal at the destination to be a very challenging task. This thesis seeks to develop estimation and compensation algorithms that can achieve synchronization and enable cooperative communication for both decode-and-forward (DF) and amplify-and-forward (AF) relaying networks in the presence of multiple impairments, i.e., unknown channel gains, MTOs, and MCFOs. In the first part of the thesis, a training-based transmission scheme is considered, in which training symbols are transmitted first in order to assist the joint estimation of multiple impairments at the destination node in DF and AF cooperative relaying networks. New transceiver structure at the relays and novel receiver design at the destination are proposed which allow for the decoding of the received signal in the presence of unknown channel gains, MTOs, and MCFOs. Different estimation algorithms, e.g., least squares (LS), expectation conditional maximization (ECM), space-alternating generalized expectation-maximization (SAGE), and differential evolution (DE), are proposed and analyzed for joint estimation of multiple impairments. In order to compare the estimation accuracy of the proposed estimators, Cramer-Rao lower bounds (CRLBs) for the multi-parameter estimation are derived. Next, in order to detect the signal from multiple relays in the presence of multiple impairments, novel optimal and sub-optimal minimum mean-square error (MMSE) compensation and maximum likelihood (ML) decoding algorithm are proposed for the destination receiver. It has been evidenced by numerical simulations that application of the proposed estimation and compensation methods in conjunction with space-time block codes achieve full diversity gain in the presence of channel and synchronization impairments. Considering training-based transmission scheme, this thesis also addresses the design of optimal training sequences for efficient and joint estimation of MTOs and multiple channel parameters. In the second part of the thesis, the problem of joint estimation and compensation of multiple impairments in non-data-aided (NDA) DF cooperative systems is addressed. The use of blind source separation is proposed at the destination to convert the difficult problem of jointly estimating the multiple synchronization parameters in the relaying phase into more tractable sub-problems of estimating many individual timing offsets and carrier frequency offsets for the independent relays. Next, a criteria for best relay selection is proposed at the destination. Applying the relay selection algorithm, simulation results demonstrate promising bit-error rate (BER) performance and realise the achievable maximum diversity order at the destination.

Author: Yuzhe Yao
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Synchronization is one of the most important issues in wireless communication systems design and implementation. The requirement for synchronization is going high as the signal bandwidth and the system complexity increases. For instance, the ultra-short pulse width in ultra-wideband (UWB) communication systems poses problems to the conventional timing synchronization methods and the multi-node transmission poses problems to the existing carrier frequency offset (CFO) synchronization methods. Moreover, the impact of imperfect synchronization in these systems on the system performance is more negative than that of the conventional communication systems. Therefore, efficient synchronization algorithms are really in need. This dissertation presents several synchronization methods aiming to either improve the synchronization performance or reduce the synchronization complexity. The focus of this dissertation is on UWB systems and cooperative systems. Both timing synchronization and carrier frequency synchronization problems have been investigated. Several different systems are considered, including the point to point block transmission based UWB communications, orthogonal frequency division multiplexing (OFDM) based one way and two way relaying communication systems and narrow band cooperative communication systems. For block transmission UWB systems, i.e., both OFDM and single carrier frequency domain equalization (SC-FDE) UWB systems, a new generic timing estimation method based on channel impulse response (CIR) estimation is proposed. The newly proposed method is superior to the existing methods not only in synchronization performance, but also in the algorithm complexity. For the multi-node cooperative communications, the CFO mitigation issue is studied with OFDM signaling. Due to the distributed nature of the cooperative system, the multiple CFO problem is inevitable and hard to solve. A two-step compensation scheme is designed to suppress the interference introduced by multiple CFO with low complexity. Moreover, timing synchronization in cooperative communications is studied, including the broadband OFDM based cooperative communication and the narrow band cooperative communication. A means of determining the optimal timing of the OFDM signal in asynchronous two way relay networks (TWRN) has been designed. A correlation based multi-delay estimation method is proposed for narrow band asynchronous cooperative communication systems. The synchronization issues covering both timing and carrier synchronization have been extensively studied in this dissertation. New synchronization methods have been proposed for the emerging transmission schemes such as high rate UWB transmission and the distributed cooperative transmission with challenges different from conventional wireless transmission schemes.

Author: Athanasios G. Kanatas
Publisher: CRC Press
ISBN: 1351651870
Category : Computers
Languages : en
Pages : 420

View

Book Description
Beyond 2020, wireless communication systems will have to support more than 1,000 times the traffic volume of today's systems. This extremely high traffic load is a major issue faced by 5G designers and researchers. This challenge will be met by a combination of parallel techniques that will use more spectrum more flexibly, realize higher spectral efficiency, and densify cells. Novel techniques and paradigms must be developed to meet these goals. The book addresses diverse key-point issues of next-generation wireless communications systems and identifies promising solutions. The book's core is concentrated to techniques and methods belonging to what is generally called radio access network.

Author: Mohammed Al-Hamiri
Publisher:
ISBN:
Category : Signal processing
Languages : en
Pages : 240

View

Book Description
"Timing synchronization plays an important role in recovering the original transmitted signal in telecommunication systems. In order to have a communication system that operates at the correct time and in the correct order, it is necessary to synchronize to the transmitter’s symbol timing. Synchronization can be accomplished when the receiver clock tracks the periodic timing information in a transmitted signal to reproduce the original signal. In this thesis work, we report the design, implementation and evaluation of a timing synchronization algorithm based on the technique first proposed by Gardner [1], applied to wireless communication using the Alamouti spacetime code [2] under QPSK modulation with halfsine pulses. To achieve this, a mathematical model is introduced which includes software design of communication algorithms. In this modeling, we simulate the Gardner algorithm in MATLAB. Then, five techniques are introduced to improve the performance of the loop filter in the digital receiver, and they are successfully implemented and evaluated in Matlab. These five techniques prove that there is an improvement in digital receiver performance in terms of the convergence speed and the communication system complexity. On the other hand, the optimum decoding of the Alamouti spacetime code, as initially proposed, makes the nontrivial assumption that the communication system is perfectly synchronized. Realistic wireless environments contain additive white Gaussian noise (AWGN), multipath fading, and it is not perfectly synchronized. In this thesis, the Alamouti spacetime code technique is written for QPSK modulation scheme to work in realistic environment that involves a timing synchronization technique. We compare the bit error rate (BER) of the Alamouti decoder when synchronized using the proposed algorithms with the ideal results found in the literature, and we find them to be similar, proving that the synchronization algorithm is in fact achieving optimum synchronization. This thesis presents synchronization algorithms that are necessary for a complete working wireless Alamouti technique. Also, this thesis improves the communication system performance in terms of the convergence speed with reducing the computational complexity of the communication system design."--Abstract.

Author: Xiaoxia Zhang
Publisher:
ISBN:
Category :
Languages : en
Pages : 126

View

Book Description
Driven by the significant consumer demand for reliable and high data rate communications, the future-generation cellular systems are expected to employ cutting-edge techniques to improve the service provisioning at substantially reduced costs. Cooperative relaying is one of the primary techniques due to its ability to improve the spectrum utilization by taking advantage of the broadcast nature of wireless signals. This dissertation studies the physical layer cooperative relaying technique and resource allocation schemes in the cooperative cellular networks to improve the spectrum and energy efficiency from the perspectives of downlink transmission, uplink transmission and device-to-device transmission, respectively. For the downlink transmission, we consider an LTE-Advanced cooperative cellular network with the deployment of Type II in-band decode-and-forward relay stations (RSs) to enhance the cell-edge throughput and to extend the coverage area. This type of relays can better exploit the broadcast nature of wireless signals while improving the utilization of existing allocated spectral resources. For such a network, we propose joint orthogonal frequency division multiplexing (OFDM) subcarrier and power allocation schemes to optimize the downlink multi-user transmission efficiency. Firstly, an optimal power dividing method between eNB and RS is proposed to maximize the achievable rate on each subcarrier. Based on this result, we show that the optimal joint resource allocation scheme for maximizing the overall throughput is to allocate each subcarrier to the user with the best channel quality and to distribute power in a water-filling manner. Since the users' Quality of Service (QoS) provision is one of the major design objectives in cellular networks, we further formulate a lexicographical optimization problem to maximize the minimum rate of all users while improving the overall throughput. A sufficient condition for optimality is derived. Due to the complexity of searching for the optimal solution, we then propose an efficient, low-complexity suboptimal joint resource allocation algorithm, which outperforms the existing suboptimal algorithms that simplify the joint design into separate allocation. Both theoretical and numerical analyses demonstrate that our proposed scheme can drastically improve the fairness as well as the overall throughput. As the physical layer uplink transmission technology for LTE-Advanced cellular network is based on single carrier frequency division multiple access (SC-FDMA) with frequency domain equalization (FDE), this dissertation further studies the uplink achievable rate and power allocation to improve the uplink spectrum efficiency in the cellular network. Different from the downlink OFDM system, signals on all subcarriers in the SC-FDMA system are transmitted sequentially rather than in parallel, thus the user's achievable rate is not simply the summation of the rates on all allocated subcarriers. Moreover, each user equipment (UE) has its own transmission power constraint instead of a total power constraint at the base station in the downlink case. Therefore, the uplink resource allocation problem in the LTE-Advanced system is more challenging. To this end, we first derive the achievable rates of the SC-FDMA system with two commonly-used FDE techniques, zero-forcing (ZF) equalization and minimum mean square error (MMSE) equalization, based on the joint superposition coding for cooperative relaying. We then propose optimal power allocation schemes among subcarriers at both UE and RS to maximize the overall throughput of the system. Theoretical analysis and numerical results are provided to demonstrate a significant gain in the system throughput by our proposed power allocation schemes. Besides the physical layer technology, the trend of improving energy efficiency in future cellular networks also motivates the network operators to continuously bring improvements in the entire network infrastructure. Such techniques include efficient base station (BS) redesign, opportunistic transmission such as device-to-device and cognitive radio communications. In the third part of this dissertation, we explore the potentials of employing cooperative relaying in a green device-to-device communication underlaying cellular network to improve the energy efficiency and spectrum utilization of the system. As the green base station is powered by sustainable energy, the design objective is to enhance both sustainability and efficiency of the device-to-device communication. Specifically, we first propose optimal power adaptation schemes to maximize the network spectrum efficiency under two practical power constraints. We then take the dynamics of the charging and discharging processes of the energy buffer at the BS into consideration to ensure the network sustainability. To this end, the energy buffer is modeled as a G/D/1 queue where the input energy has a general distribution. Power allocation schemes are proposed based on the statistics of the energy buffer to further enhance the network efficiency and sustainability. Theoretical analysis and numerical results are presented to demonstrate that our proposed power allocation schemes can improve the network throughput while maintaining the network sustainability at a certain level. Our analyses developed in this dissertation indicate that the cooperative transmission based on cooperative relaying can significantly improve the spectrum efficiency and energy efficiency of the cellular network for downlink transmission, uplink transmission and device-to-device communication. Our proposed cooperative relaying technique and resource allocation schemes can provide efficient solutions to practical design and optimization of future-generation cellular networks.

Author: Muhammad Mehboob Fareed
Publisher:
ISBN:
Category :
Languages : en
Pages : 86

View

Book Description
Cooperative communication is a new class of wireless communication techniques in which wireless nodes help each other relay information and realize spatial diversity advantages in a distributed manner. This new transmission technique promises significant performance gains in terms of link reliability, spectral efficiency, system capacity, and transmission range. Analysis and design of cooperative communication wireless systems have been extensively studied over the last few years. The introduction and integration of cooperative communication in next generation wireless standards will lead to the design of an efficient and reliable fully-distributed wireless network. However, there are various technical challenges and open issues to be resolved before this promising concept becomes an integral part of the modern wireless communication devices. A common assumption in the literature on cooperative communications is the equal distribution of power among the cooperating nodes. Optimum power allocation is a key technique to realize the full potentials of relay-assisted transmission promised by the recent information-theoretic results. In this dissertation, we present a comprehensive framework for power allocation problem. We investigate the error rate performance of cooperative communication systems and further devise open-loop optimum power allocation schemes to optimize the performance. By exploiting the information about the location of cooperating nodes, we are able to demonstrate significant improvements in the system performance. In the first part of this dissertation, we consider single-relay systems with amplify-and-forward relaying. We derive upper bounds for bit error rate performance assuming various cooperation protocols and minimize them under total power constraint. In the second part, we consider a multi-relay network with decode-and-forward relaying. We propose a simple relay selection scheme for this multi-relay system to improve the throughput of the system, further optimize its performance through power allocation. Finally, we consider a multi-source multi-relay broadband cooperative network. We derive and optimize approximate symbol error rate of this OFDMA (orthogonal frequency division multiple access) system.