A Comparison of the Fatigue Behavior of High Strength Cast Aluminum Alloys 201 and A357 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download A Comparison of the Fatigue Behavior of High Strength Cast Aluminum Alloys 201 and A357 PDF full book. Access full book title A Comparison of the Fatigue Behavior of High Strength Cast Aluminum Alloys 201 and A357 by K. J. Oswalt. Download full books in PDF and EPUB format.
Author: K. J. Oswalt Publisher: ISBN: Category : Languages : en Pages : 30
Book Description
The notched fatigue strength of high strength aluminum casting alloys A357 and 201 was evaluated using separately cast round tensile bar coupons. These results are considered satisfactory for comparison purposes of the alloys, but should not be used for design criteria. The results are plotted in the form of S/N curves. The materials are also compared by ultimately failing the surviving fatigue specimens in tension and then by comparing microstructures of the test specimens exhibiting highest and lowest ultimate tensile strengths. The notched tensile strength of 201 was higher than A357; notched strength values of 201 specimens were reduced by partial eutectic melting and undissolved eutectic in grain boundary regions.
Author: K. J. Oswalt Publisher: ISBN: Category : Languages : en Pages : 30
Book Description
The notched fatigue strength of high strength aluminum casting alloys A357 and 201 was evaluated using separately cast round tensile bar coupons. These results are considered satisfactory for comparison purposes of the alloys, but should not be used for design criteria. The results are plotted in the form of S/N curves. The materials are also compared by ultimately failing the surviving fatigue specimens in tension and then by comparing microstructures of the test specimens exhibiting highest and lowest ultimate tensile strengths. The notched tensile strength of 201 was higher than A357; notched strength values of 201 specimens were reduced by partial eutectic melting and undissolved eutectic in grain boundary regions.
Author: Hüseyin Özdeș Publisher: ISBN: Category : Aluminum alloys -- Fatigue -- Forecasting Languages : en Pages :
Book Description
Cast aluminum alloys are common in automotive and aerospace applications due to their high strength-to-density ratio. Fracture data for cast aluminum alloys, such as fatigue life, tensile strength and elongation, are heavily affected by the structural defects, such as pores and bifilms. There have been numerous studies in which either fatigue performance or tensile deformation were characterized and linked to casting defects. However, a comprehensive study that correlates tensile and fatigue properties has not been reported. The present study is motivated to fill this gap. The main objective of the investigation is to analyze the link between tensile and fatigue performance of commonly used cast aluminum alloys, and determine whether fatigue performance of cast aluminum alloys can be predicted. To accomplish this task, four research questions were developed: (i) how well do equations developed to account for mean stress effects perform in cast aluminum alloys, especially in datasets with various levels of structural quality, (ii) is the strong correlation between fatigue life and structural quality index obtained from tensile data reported for A206 alloy castings applicable to other aerospace and automotive casting alloys, (iii) how do methods to estimate high cycle fatigue from tensile data perform with aluminum castings, and (iv) can the axial fatigue performance of an A356-T6 casting be predicted from rotating beam fatigue data. Among the three mean stress correction models analyzed by using seven datasets from the literature, the one developed by Walker with an adjustable exponent has provided the best fit. It has been hypothesized that the adjustable Walker parameter is related to the structural quality index, QT, estimated from tensile data. Results have shown that there is indeed a strong correlation between QT and the Walker parameter. Moreover the parameters of the xvi Weibull distribution estimated from corrected data have been found to be strongly influenced by the mean stress correction method used. Tensile and fatigue life data for 319, D357 and B201 aluminum alloy castings reported in the literature have been reanalyzed by using a maximum likelihood method to estimate Basquin parameters in datasets with run-outs, Weibull statistics for censored data and mean stress correction. After converting tensile data to QT, a distinct relationship has been observed between the expected fatigue life and mean quality index for all alloys. Moreover, probability of survival in fatigue life has been found to be directly linked to the proportions of the quality index distributions in two different regions, providing further evidence about the strong relationship between elongation, i.e., structural quality, and fatigue performance [1]. Specimen geometry has been found to make the largest difference whereas the two aerospace alloys, B201 and D357, with distinctly different microstructures, have followed the same relationship, reinforcing the findings in the literature that fatigue life in aluminum castings is mainly determined by the size distribution and number density of structural defects. Six methods to predict fatigue life from tensile data have been compared by using data from the literature as well as the experimental A356 data developed in this study. Results have shown that none of the six methods provide reliable results. The consistently poor performance of the methods developed for steels and wrought alloys can be attributed to the major structural defects, namely bifilms, in aluminum castings. A new method to estimate the S-N curve from tensile data have been developed by using data for seventy-one S-N curves have been collected and Basquin parameters have been determined. Analysis showed that there is a strong relationship between QT and the Basquin exponent. xvii The Basquin parameters estimated by using the empirical relationships developed in the present study have provided better fits to the same datasets tested for the six methods. Hence the model developed in this study is proposed as the most reliable method to estimate high cycle fatigue properties. Finally, three methods to convert rotating bending fatigue test results to uniaxial fatigue data have been investigated by using the data developed in this study. Results have indicated that the method developed by Esin, in which both the fatigue life and alternating stress are corrected, provide the best estimate. Analyses of fracture surfaces of broken specimens via scanning electron microscopy have shown that tensile, axial fatigue and rotating beam fatigue properties are all strongly influenced by the same structural defects, confirming the validity of the approach taken in this study.
Author: Murat Tiryakioǧlu Publisher: John Wiley & Sons ISBN: 1119274842 Category : Technology & Engineering Languages : en Pages : 241
Book Description
This collection presents papers on the science, engineering, and technology of shape castings, with contributions from researchers worldwide. Among the topics that are addressed are structure-property-performance relationships, modeling of casting processes, and the effect of casting defects on the mechanical properties of cast alloys.
Author: D. N. Williams Publisher: ISBN: Category : Aluminum alloys Languages : en Pages : 22
Book Description
The effects of environment on fatigue behavior are quite intimately related to such test variables as stress intensity, cyclic frequency, and temperature. The effect of these variables has been shown to be quite complex. However, a consistent pattern of behavior is beginning to emerge which, it is hoped, will lead to a considerably changed understanding of the corrosion-fatigue process. It is considered probable that an increased understanding of the corrosion-fatigue process will also contribute measureably to an improved understanding of general fatigue processes. Material variables such as composition, directionality of properties, and microstructure, have important effects on corrosion-fatigue behavior of aluminum alloys. However, it appears that these variables, at least in gaseous environments, may be important largely because of their effects on the mechanical behavior of aluminum alloys. On the other hand, studies in seawater suggest that these variables become increasingly important as the corrosive nature of the environment increases. This memorandum discusses in detail the effects of both test variables and material variables on corrosion fatigue. In addition, current theories of corrosion-fatigue mechanisms are outlined, and several methods of preventing corrosion fatigue are suggested. (Author).
Author: Phalgun Nelaturu Publisher: ISBN: Category : Aluminum alloys Languages : en Pages : 87
Book Description
Metal fatigue is a recurring problem for metallurgists and materials engineers, especially in structural applications. It has been responsible for many disastrous accidents and tragedies in history. Understanding the micro-mechanisms during cyclic deformation and combating fatigue failure has remained a grand challenge. Environmental effects, like temperature or a corrosive medium, further worsen and complicate the problem. Ultimate design against fatigue must come from a materials perspective with a fundamental understanding of the interaction of microstructural features with dislocations, under the influence of stress, temperature, and other factors. This research endeavors to contribute to the current understanding of the fatigue failure mechanisms. Cast aluminum alloys are susceptible to fatigue failure due to the presence of defects in the microstructure like casting porosities, non-metallic inclusions, non-uniform distribution of secondary phases, etc. Friction stir processing (FSP), an emerging solid state processing technique, is an effective tool to refine and homogenize the cast microstructure of an alloy. In this work, the effect of FSP on the microstructure of an A356 cast aluminum alloy, and the resulting effect on its tensile and fatigue behavior have been studied. The main focus is on crack initiation and propagation mechanisms, and how stage I and stage II cracks interact with the different microstructural features. Three unique microstructural conditions have been tested for fatigue performance at room temperature, 150 °C and 200 °C. Detailed fractography has been performed using optical microscopy, scanning electron microscopy (SEM) and electron back scattered diffraction (EBSD). These tools have also been utilized to characterize microstructural aspects like grain size, eutectic silicon particle size and distribution. Cyclic deformation at low temperatures is very sensitive to the microstructural distribution in this alloy. The findings from the room temperature fatigue tests highlight the important role played by persistent slip bands (PSBs) in fatigue crack initiation. At room temperature, cracks initiate along PSBs in the absence of other defects/stress risers, and grow transgranularly. Their propagation is retarded when they encounter grain boundaries. Another major finding is the complete transition of the mode of fatigue cracking from transgranular to intergranular, at 200 °C. This occurs when PSBs form in adjacent grains and impinge on grain boundaries, raising the stress concentration at these locations. This initiates cracks along the grain boundaries. At these temperatures, cyclic deformation is no longer microstructure- dependent. Grain boundaries don't impede the progress of cracks, instead aid in their propagation. This work has extended the current understanding of fatigue cracking mechanisms in A356 Al alloys to elevated temperatures.
Author: Publisher: ISBN: Category : Aeronautics Languages : en Pages : 1126
Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Author: K. J. Oswalt
Author: K. J. Oswalt
Author: Ronald Joseph Selines
Author: Hüseyin Özdeș
Author: Kuang-Ho Chien
Author: Murat Tiryakioǧlu
Author: D. N. Williams
Author: Phalgun Nelaturu
Author: 
Author: Curt C. Wigant
Author: D. A. Paul