Index of Conference Proceedings PDF Download

Author: British Library. Document Supply Centre
Publisher:
ISBN:
Category : Conference proceedings
Languages : en
Pages : 890

View

Book Description

Author: Mahmoud Khalifeh
Publisher: Springer Nature
ISBN: 3030399702
Category : Technology & Engineering
Languages : en
Pages : 285

View

Book Description
This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Author: Davorin Matanovic
Publisher: Springer Science & Business Media
ISBN: 3642256147
Category : Science
Languages : en
Pages : 205

View

Book Description
Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.

Author: W. L. Penberthy
Publisher: Society of Petroleum Engineers
ISBN:
Category : Business & Economics
Languages : en
Pages : 116

View

Book Description
This practical guide details a variety of production and completion techniques for controlling sand that are as useful today as when this volume was first published.

Author: Larry Diamond
Publisher: Hoover Press
ISBN: 0817922865
Category : Political Science
Languages : en
Pages : 223

View

Book Description
While Americans are generally aware of China's ambitions as a global economic and military superpower, few understand just how deeply and assertively that country has already sought to influence American society. As the authors of this volume write, it is time for a wake-up call. In documenting the extent of Beijing's expanding influence operations inside the United States, they aim to raise awareness of China's efforts to penetrate and sway a range of American institutions: state and local governments, academic institutions, think tanks, media, and businesses. And they highlight other aspects of the propagandistic “discourse war” waged by the Chinese government and Communist Party leaders that are less expected and more alarming, such as their view of Chinese Americans as members of a worldwide Chinese diaspora that owes undefined allegiance to the so-called Motherland.Featuring ideas and policy proposals from leading China specialists, China's Influence and American Interests argues that a successful future relationship requires a rebalancing toward greater transparency, reciprocity, and fairness. Throughout, the authors also strongly state the importance of avoiding casting aspersions on Chinese and on Chinese Americans, who constitute a vital portion of American society. But if the United States is to fare well in this increasingly adversarial relationship with China, Americans must have a far better sense of that country's ambitions and methods than they do now.

Author: U. S. Customs and Border Protection
Publisher:
ISBN: 9781304100061
Category : Education
Languages : en
Pages : 0

View

Book Description
Explains process of importing goods into the U.S., including informed compliance, invoices, duty assessments, classification and value, marking requirements, etc.

Author: Johannes Fink
Publisher: Gulf Professional Publishing
ISBN: 0123838452
Category : Technology & Engineering
Languages : en
Pages : 809

View

Book Description
Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index

Author: Thomas C. Jester
Publisher: Getty Publications
ISBN: 1606063251
Category : Architecture
Languages : en
Pages : 354

View

Book Description
Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.

Author: Gary R. Mullen
Publisher: Academic Press
ISBN: 0080919693
Category : Science
Languages : en
Pages : 646

View

Book Description
Medical and Veterinary Entomology, Second Edition, has been fully updated and revised to provide the latest information on developments in entomology relating to public health and veterinary importance. Each chapter is structured with the student in mind, organized by the major headings of Taxonomy, Morphology, Life History, Behavior and Ecology, Public Health and Veterinary Importance, and Prevention and Control. This second edition includes separate chapters devoted to each of the taxonomic groups of insects and arachnids of medical or veterinary concern, including spiders, scorpions, mites, and ticks. Internationally recognized editors Mullen and Durden include extensive coverage of both medical and veterinary entomological importance. This book is designed for teaching and research faculty in medical and veterinary schools that provide a course in vector borne diseases and medical entomology; parasitologists, entomologists, and government scientists responsible for oversight and monitoring of insect vector borne diseases; and medical and veterinary school libraries and libraries at institutions with strong programs in entomology. Follows in the tradition of Herm's Medical and Veterinary Entomology The latest information on developments in entomology relating to public health and veterinary importance Two separate indexes for enhanced searchability: Taxonomic and Subject New to this edition: Three new chapters Morphological Adaptations of Parasitic Arthropods Forensic Entomology Molecular Tools in Medical and Veterinary Entomology 1700 word glossary Appendix of Arthropod-Related Viruses of Medical-Veterinary Importance Numerous new full-color images, illustrations and maps throughout

Author: P.J. Fellows
Publisher: Elsevier
ISBN: 1845696344
Category : Technology & Engineering
Languages : en
Pages : 932

View

Book Description
The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics