Author: Azer Bestavros
Publisher: Springer Science & Business Media
ISBN: 1461561612
Category : Computers
Languages : en
Pages : 376
Book Description
Despite the growing interest in Real-Time Database Systems, there is no single book that acts as a reference to academics, professionals, and practitioners who wish to understand the issues involved in the design and development of RTDBS. Real-Time Database Systems: Issues and Applications fulfills this need. This book presents the spectrum of issues that may arise in various real-time database applications, the available solutions and technologies that may be used to address these issues, and the open problems that need to be tackled in the future. With rapid advances in this area, several concepts have been proposed without a widely accepted consensus on their definitions and implications. To address this need, the first chapter is an introduction to the key RTDBS concepts and definitions, which is followed by a survey of the state of the art in RTDBS research and practice. The remainder of the book consists of four sections: models and paradigms, applications and benchmarks, scheduling and concurrency control, and experimental systems. The chapters in each section are contributed by experts in the respective areas. Real-Time Database Systems: Issues and Applications is primarily intended for practicing engineers and researchers working in the growing area of real-time database systems. For practitioners, the book will provide a much needed bridge for technology transfer and continued education. For researchers, this book will provide a comprehensive reference for well-established results. This book can also be used in a senior or graduate level course on real-time systems, real-time database systems, and database systems or closely related courses.
Real-Time Database Systems
Author: Azer Bestavros
Publisher: Springer Science & Business Media
ISBN: 1461561612
Category : Computers
Languages : en
Pages : 376
Book Description
Despite the growing interest in Real-Time Database Systems, there is no single book that acts as a reference to academics, professionals, and practitioners who wish to understand the issues involved in the design and development of RTDBS. Real-Time Database Systems: Issues and Applications fulfills this need. This book presents the spectrum of issues that may arise in various real-time database applications, the available solutions and technologies that may be used to address these issues, and the open problems that need to be tackled in the future. With rapid advances in this area, several concepts have been proposed without a widely accepted consensus on their definitions and implications. To address this need, the first chapter is an introduction to the key RTDBS concepts and definitions, which is followed by a survey of the state of the art in RTDBS research and practice. The remainder of the book consists of four sections: models and paradigms, applications and benchmarks, scheduling and concurrency control, and experimental systems. The chapters in each section are contributed by experts in the respective areas. Real-Time Database Systems: Issues and Applications is primarily intended for practicing engineers and researchers working in the growing area of real-time database systems. For practitioners, the book will provide a much needed bridge for technology transfer and continued education. For researchers, this book will provide a comprehensive reference for well-established results. This book can also be used in a senior or graduate level course on real-time systems, real-time database systems, and database systems or closely related courses.
Publisher: Springer Science & Business Media
ISBN: 1461561612
Category : Computers
Languages : en
Pages : 376
Book Description
Despite the growing interest in Real-Time Database Systems, there is no single book that acts as a reference to academics, professionals, and practitioners who wish to understand the issues involved in the design and development of RTDBS. Real-Time Database Systems: Issues and Applications fulfills this need. This book presents the spectrum of issues that may arise in various real-time database applications, the available solutions and technologies that may be used to address these issues, and the open problems that need to be tackled in the future. With rapid advances in this area, several concepts have been proposed without a widely accepted consensus on their definitions and implications. To address this need, the first chapter is an introduction to the key RTDBS concepts and definitions, which is followed by a survey of the state of the art in RTDBS research and practice. The remainder of the book consists of four sections: models and paradigms, applications and benchmarks, scheduling and concurrency control, and experimental systems. The chapters in each section are contributed by experts in the respective areas. Real-Time Database Systems: Issues and Applications is primarily intended for practicing engineers and researchers working in the growing area of real-time database systems. For practitioners, the book will provide a much needed bridge for technology transfer and continued education. For researchers, this book will provide a comprehensive reference for well-established results. This book can also be used in a senior or graduate level course on real-time systems, real-time database systems, and database systems or closely related courses.
Real-Time and Embedded Computing Systems and Applications
Author: Jing Chen
Publisher: Springer Science & Business Media
ISBN: 3540219749
Category : Computers
Languages : en
Pages : 634
Book Description
This book constitutes the thoroughly refereed post-proceedings of the 9th International Conference on Real-Time and Embedded Systems and Applications, RTCSA 2003, held in Tainan, Taiwan, in February 2003. The 28 revised full papers and 9 revised short papers presented were carefully reviewed and selected for inclusion in the book. The papers are organized in topical sections on scheduling, networking and communication, embedded systems and environments, pervasive and ubiquitous computing, systems and architectures, resource management, file systems and databases, performance analysis, and tools and development.
Publisher: Springer Science & Business Media
ISBN: 3540219749
Category : Computers
Languages : en
Pages : 634
Book Description
This book constitutes the thoroughly refereed post-proceedings of the 9th International Conference on Real-Time and Embedded Systems and Applications, RTCSA 2003, held in Tainan, Taiwan, in February 2003. The 28 revised full papers and 9 revised short papers presented were carefully reviewed and selected for inclusion in the book. The papers are organized in topical sections on scheduling, networking and communication, embedded systems and environments, pervasive and ubiquitous computing, systems and architectures, resource management, file systems and databases, performance analysis, and tools and development.
Real-Time Database Systems
Author: Kam-Yiu Lam
Publisher: Springer Science & Business Media
ISBN: 030646988X
Category : Computers
Languages : en
Pages : 289
Book Description
In recent years, tremendous research has been devoted to the design of database systems for real-time applications, called real-time database systems (RTDBS), where transactions are associated with deadlines on their completion times, and some of the data objects in the database are associated with temporal constraints on their validity. Examples of important applications of RTDBS include stock trading systems, navigation systems and computer integrated manufacturing. Different transaction scheduling algorithms and concurrency control protocols have been proposed to satisfy transaction timing data temporal constraints. Other design issues important to the performance of a RTDBS are buffer management, index accesses and I/O scheduling. Real-Time Database Systems: Architecture and Techniques summarizes important research results in this area, and serves as an excellent reference for practitioners, researchers and educators of real-time systems and database systems.
Publisher: Springer Science & Business Media
ISBN: 030646988X
Category : Computers
Languages : en
Pages : 289
Book Description
In recent years, tremendous research has been devoted to the design of database systems for real-time applications, called real-time database systems (RTDBS), where transactions are associated with deadlines on their completion times, and some of the data objects in the database are associated with temporal constraints on their validity. Examples of important applications of RTDBS include stock trading systems, navigation systems and computer integrated manufacturing. Different transaction scheduling algorithms and concurrency control protocols have been proposed to satisfy transaction timing data temporal constraints. Other design issues important to the performance of a RTDBS are buffer management, index accesses and I/O scheduling. Real-Time Database Systems: Architecture and Techniques summarizes important research results in this area, and serves as an excellent reference for practitioners, researchers and educators of real-time systems and database systems.
Real-Time Systems
Author: Albert M. K. Cheng
Publisher: John Wiley & Sons
ISBN: 0471460842
Category : Computers
Languages : en
Pages : 552
Book Description
The first book to provide a comprehensive overview of the subject rather than a collection of papers. The author is a recognized authority in the field as well as an outstanding teacher lauded for his ability to convey these concepts clearly to many different audiences. A handy reference for practitioners in the field.
Publisher: John Wiley & Sons
ISBN: 0471460842
Category : Computers
Languages : en
Pages : 552
Book Description
The first book to provide a comprehensive overview of the subject rather than a collection of papers. The author is a recognized authority in the field as well as an outstanding teacher lauded for his ability to convey these concepts clearly to many different audiences. A handy reference for practitioners in the field.
Distributed Systems for System Architects
Author: Paulo Veríssimo
Publisher: Springer Science & Business Media
ISBN: 1461516633
Category : Computers
Languages : en
Pages : 636
Book Description
The primary audience for this book are advanced undergraduate students and graduate students. Computer architecture, as it happened in other fields such as electronics, evolved from the small to the large, that is, it left the realm of low-level hardware constructs, and gained new dimensions, as distributed systems became the keyword for system implementation. As such, the system architect, today, assembles pieces of hardware that are at least as large as a computer or a network router or a LAN hub, and assigns pieces of software that are self-contained, such as client or server programs, Java applets or pro tocol modules, to those hardware components. The freedom she/he now has, is tremendously challenging. The problems alas, have increased too. What was before mastered and tested carefully before a fully-fledged mainframe or a closely-coupled computer cluster came out on the market, is today left to the responsibility of computer engineers and scientists invested in the role of system architects, who fulfil this role on behalf of software vendors and in tegrators, add-value system developers, R&D institutes, and final users. As system complexity, size and diversity grow, so increases the probability of in consistency, unreliability, non responsiveness and insecurity, not to mention the management overhead. What System Architects Need to Know The insight such an architect must have includes but goes well beyond, the functional properties of distributed systems.
Publisher: Springer Science & Business Media
ISBN: 1461516633
Category : Computers
Languages : en
Pages : 636
Book Description
The primary audience for this book are advanced undergraduate students and graduate students. Computer architecture, as it happened in other fields such as electronics, evolved from the small to the large, that is, it left the realm of low-level hardware constructs, and gained new dimensions, as distributed systems became the keyword for system implementation. As such, the system architect, today, assembles pieces of hardware that are at least as large as a computer or a network router or a LAN hub, and assigns pieces of software that are self-contained, such as client or server programs, Java applets or pro tocol modules, to those hardware components. The freedom she/he now has, is tremendously challenging. The problems alas, have increased too. What was before mastered and tested carefully before a fully-fledged mainframe or a closely-coupled computer cluster came out on the market, is today left to the responsibility of computer engineers and scientists invested in the role of system architects, who fulfil this role on behalf of software vendors and in tegrators, add-value system developers, R&D institutes, and final users. As system complexity, size and diversity grow, so increases the probability of in consistency, unreliability, non responsiveness and insecurity, not to mention the management overhead. What System Architects Need to Know The insight such an architect must have includes but goes well beyond, the functional properties of distributed systems.
Hybrid Systems: Computation and Control
Author: Alberto Bemporad
Publisher: Springer Science & Business Media
ISBN: 3540714928
Category : Computers
Languages : en
Pages : 812
Book Description
This book constitutes the refereed proceedings of the 10th International Conference on Hybrid Systems: Computation and Control, HSCC 2007, held in Pisa, Italy in April 2007. The 44 revised full papers and 39 revised short papers presented together with the abstracts of 3 keynote talks were carefully reviewed and selected from 167 submissions. Among the topics addressed are models of heterogeneous systems, computability and complexity issues, real-time computing and control, embedded and resource-aware control, control and estimation over wireless networks, tools for analysis, verification, control, and design, programming languages support and implementation, applications, including automotive, communication networks, avionics, energy systems, transportation networks, biology and other sciences, manufacturing, and robotics.
Publisher: Springer Science & Business Media
ISBN: 3540714928
Category : Computers
Languages : en
Pages : 812
Book Description
This book constitutes the refereed proceedings of the 10th International Conference on Hybrid Systems: Computation and Control, HSCC 2007, held in Pisa, Italy in April 2007. The 44 revised full papers and 39 revised short papers presented together with the abstracts of 3 keynote talks were carefully reviewed and selected from 167 submissions. Among the topics addressed are models of heterogeneous systems, computability and complexity issues, real-time computing and control, embedded and resource-aware control, control and estimation over wireless networks, tools for analysis, verification, control, and design, programming languages support and implementation, applications, including automotive, communication networks, avionics, energy systems, transportation networks, biology and other sciences, manufacturing, and robotics.
Multiprocessor Systems-on-Chips
Author: Ahmed Jerraya
Publisher: Morgan Kaufmann
ISBN: 012385251X
Category : Computers
Languages : en
Pages : 604
Book Description
Modern system-on-chip (SoC) design shows a clear trend toward integration of multiple processor cores on a single chip. Designing a multiprocessor system-on-chip (MPSOC) requires an understanding of the various design styles and techniques used in the multiprocessor. Understanding the application area of the MPSOC is also critical to making proper tradeoffs and design decisions. Multiprocessor Systems-on-Chips covers both design techniques and applications for MPSOCs. Design topics include multiprocessor architectures, processors, operating systems, compilers, methodologies, and synthesis algorithms, and application areas covered include telecommunications and multimedia. The majority of the chapters were collected from presentations made at the International Workshop on Application-Specific Multi-Processor SoC held over the past two years. The workshop assembled internationally recognized speakers on the range of topics relevant to MPSOCs. After having refined their material at the workshop, the speakers are now writing chapters and the editors are fashioning them into a unified book by making connections between chapters and developing common terminology. *Examines several different architectures and the constraints imposed on them *Discusses scheduling, real-time operating systems, and compilers *Analyzes design trade-off and decisions in telecommunications and multimedia applications
Publisher: Morgan Kaufmann
ISBN: 012385251X
Category : Computers
Languages : en
Pages : 604
Book Description
Modern system-on-chip (SoC) design shows a clear trend toward integration of multiple processor cores on a single chip. Designing a multiprocessor system-on-chip (MPSOC) requires an understanding of the various design styles and techniques used in the multiprocessor. Understanding the application area of the MPSOC is also critical to making proper tradeoffs and design decisions. Multiprocessor Systems-on-Chips covers both design techniques and applications for MPSOCs. Design topics include multiprocessor architectures, processors, operating systems, compilers, methodologies, and synthesis algorithms, and application areas covered include telecommunications and multimedia. The majority of the chapters were collected from presentations made at the International Workshop on Application-Specific Multi-Processor SoC held over the past two years. The workshop assembled internationally recognized speakers on the range of topics relevant to MPSOCs. After having refined their material at the workshop, the speakers are now writing chapters and the editors are fashioning them into a unified book by making connections between chapters and developing common terminology. *Examines several different architectures and the constraints imposed on them *Discusses scheduling, real-time operating systems, and compilers *Analyzes design trade-off and decisions in telecommunications and multimedia applications
Languages, Compilers, and Tools for Embedded Systems
Author: Frank Mueller
Publisher: Springer Science & Business Media
ISBN: 9783540650751
Category : Compilers (Computer programs)
Languages : en
Pages : 284
Book Description
This book constitutes the strictly refereed post-workshop proceedings of the ACM SIGPLAN Workshop on Languages, Compilers, and Tools for Embedded Systems, LCTES '98, held in Montreal, Canada, in June 1998. The 19 revised papers presented were carefully reviewed and selected from a total of 54 submissions for inclusion in the book; also included are one full paper and an abstract of an invited contribution. The papers address all current aspects of research and development in the rapidly growing area of embedded systems and real-time computing.
Publisher: Springer Science & Business Media
ISBN: 9783540650751
Category : Compilers (Computer programs)
Languages : en
Pages : 284
Book Description
This book constitutes the strictly refereed post-workshop proceedings of the ACM SIGPLAN Workshop on Languages, Compilers, and Tools for Embedded Systems, LCTES '98, held in Montreal, Canada, in June 1998. The 19 revised papers presented were carefully reviewed and selected from a total of 54 submissions for inclusion in the book; also included are one full paper and an abstract of an invited contribution. The papers address all current aspects of research and development in the rapidly growing area of embedded systems and real-time computing.
Specification and Design Methodology for Real-Time Embedded Systems
Author: Randall S. Janka
Publisher: Springer Science & Business Media
ISBN: 1461508371
Category : Technology & Engineering
Languages : en
Pages : 240
Book Description
Specification and design methodology has seen significant growth as a research area over the last decade, tracking but lagging behind VLSI design technology in general and the CAD industry in particular. The commercial rush to market tries to leverage existing technology which fuels CAD design tool development. Paralleling this is very active basic and applied research to investigate and move forward rational and effective methodologies for accomplishing digital design, especially in the field of hardware/software codesign. It is this close relationship between industry and academia that makes close cooperation between researchers and practitioners so important-and monographs like this that combine both abstract concept and pragmatic implementation deftly bridge this often gaping chasm. It was at the IEEE/ACM Eighth International Symposium on Hardware/Software Codesign where I met the author of this monograph, Dr. Randall Janka, who was presenting some of his recent dissertation research results on specification and design methodology, or as he has so succinctly defined this sometimes ambiguous concept, "the tools and rules." Where so many codesign researchers are trying to prove out different aspects of codesign and using toy applications to do so, Dr. Janka had developed a complete specification and design methodology and prototyped the infrastructure-and proven its viability, utility, and effectiveness using a demanding real-world application of a real-time synthetic aperture radar imaging processor that was implemented with embedded parallel processors.
Publisher: Springer Science & Business Media
ISBN: 1461508371
Category : Technology & Engineering
Languages : en
Pages : 240
Book Description
Specification and design methodology has seen significant growth as a research area over the last decade, tracking but lagging behind VLSI design technology in general and the CAD industry in particular. The commercial rush to market tries to leverage existing technology which fuels CAD design tool development. Paralleling this is very active basic and applied research to investigate and move forward rational and effective methodologies for accomplishing digital design, especially in the field of hardware/software codesign. It is this close relationship between industry and academia that makes close cooperation between researchers and practitioners so important-and monographs like this that combine both abstract concept and pragmatic implementation deftly bridge this often gaping chasm. It was at the IEEE/ACM Eighth International Symposium on Hardware/Software Codesign where I met the author of this monograph, Dr. Randall Janka, who was presenting some of his recent dissertation research results on specification and design methodology, or as he has so succinctly defined this sometimes ambiguous concept, "the tools and rules." Where so many codesign researchers are trying to prove out different aspects of codesign and using toy applications to do so, Dr. Janka had developed a complete specification and design methodology and prototyped the infrastructure-and proven its viability, utility, and effectiveness using a demanding real-world application of a real-time synthetic aperture radar imaging processor that was implemented with embedded parallel processors.
Computational Science — ICCS 2004
Author: Marian Bubak
Publisher: Springer Science & Business Media
ISBN: 3540221166
Category : Computers
Languages : en
Pages : 1376
Book Description
The International Conference on Computational Science (ICCS 2004) held in Krak ́ ow, Poland, June 6–9, 2004, was a follow-up to the highly successful ICCS 2003 held at two locations, in Melbourne, Australia and St. Petersburg, Russia; ICCS 2002 in Amsterdam, The Netherlands; and ICCS 2001 in San Francisco, USA. As computational science is still evolving in its quest for subjects of inves- gation and e?cient methods, ICCS 2004 was devised as a forum for scientists from mathematics and computer science, as the basic computing disciplines and application areas, interested in advanced computational methods for physics, chemistry, life sciences, engineering, arts and humanities, as well as computer system vendors and software developers. The main objective of this conference was to discuss problems and solutions in all areas, to identify new issues, to shape future directions of research, and to help users apply various advanced computational techniques. The event harvested recent developments in com- tationalgridsandnextgenerationcomputingsystems,tools,advancednumerical methods, data-driven systems, and novel application ?elds, such as complex - stems, ?nance, econo-physics and population evolution.
Publisher: Springer Science & Business Media
ISBN: 3540221166
Category : Computers
Languages : en
Pages : 1376
Book Description
The International Conference on Computational Science (ICCS 2004) held in Krak ́ ow, Poland, June 6–9, 2004, was a follow-up to the highly successful ICCS 2003 held at two locations, in Melbourne, Australia and St. Petersburg, Russia; ICCS 2002 in Amsterdam, The Netherlands; and ICCS 2001 in San Francisco, USA. As computational science is still evolving in its quest for subjects of inves- gation and e?cient methods, ICCS 2004 was devised as a forum for scientists from mathematics and computer science, as the basic computing disciplines and application areas, interested in advanced computational methods for physics, chemistry, life sciences, engineering, arts and humanities, as well as computer system vendors and software developers. The main objective of this conference was to discuss problems and solutions in all areas, to identify new issues, to shape future directions of research, and to help users apply various advanced computational techniques. The event harvested recent developments in com- tationalgridsandnextgenerationcomputingsystems,tools,advancednumerical methods, data-driven systems, and novel application ?elds, such as complex - stems, ?nance, econo-physics and population evolution.